raid سرور Hp

[mjey]

با سلام 2 تا سوال دارم
.ما 1 سرور hp سری g6 داریم که 2003 روش نصب شده و 6 تا هارد sas
با ظرفیت 146 g داریم حالا در نرم افزار خود سرور 3تا raid0-1-5 داریم
که ظرفیت هر 3 به نسبت ظرفیت کل خیلی کمتر است از لحاظ نرم افزای و سخت افزاری چه طوری مطمن بشیم که همه هاردها دارن کارن میکنن ؟؟؟؟؟؟؟؟؟

2 .آیا برای نصب forefront 2010 حتما نیاز به 2008 64 بیت داریم یا روی 32 بیت هم نصب می شود ؟؟؟؟
تشکر

[superboy]

http://www.microsoft.com/downloads/d...displaylang=en
http://www.microsoft.com/forefront/p...uirements.aspx
http://technet.microsoft.com/en-us/e.../ee423728.aspx
64 bit require

[mjey]

لطفا سوال اول را هم جواب بدید

[Supervisor]

باید از Raid configuration در بوت اولیه ببینی که همه هارد ها هستن یا نه؟

[omidnamitabar]

با ظرفیت 146 g داریم حالا در نرم افزار خود سرور 3تا raid0-1-5 داریم

یعنی چی؟
هر سه تاشو شما با 6 تا هارد نمی تونید داشته باشید
اگه برنامه هاش رو کامل نصب کردهباشید یه برنامه با اسم hp array configuration داره اونجا ببینید

[mzbcracker]

1-باید به این نکته توجه کرد که در raid5 به اندازه فظای یک هارد از کل هاردهای شما صرف parity میشه.مثلا شما که 6 تا هارد sas داری فضایی که برای ذخیره سازی مفید داری 5 تا هارد هست یعنی 5 تا 146 گیگ

[mzbcracker]

2-
64 بیت باید باشه فقط addon هاش رو کلاینتهای 32 بیت میتونه باشه.

Required Hardware
The server(s) hosting the FIM 2010 server components must meet the following hardware requirements:
A x64 capable processor
2 gigabytes (GB) of available hard disk drive space
2 gigabytes (GB) or more of RAM
A monitor with a resolution of 1024x768
A CD-ROM or DVD-ROM drive

The client computer that hosts the FIM 2010 client-side component(s) must meet the following hardware requirements:
512 MB of RAM (1 GB recommended)
500 MB of free hard disk drive space
A monitor that can display a resolution of 1024x768
Required Software

Each server hosting the different FIM 2010 server-side components has a different software requirement. Below, you will find the software requirements for each of the FIM 2010 server-side components. If you decide to install all of the server-side components on one server, you must install the software requirements for each of the FIM 2010 server-side components on that server.
FIM 2010 Synchronization Service Software Requirements

The server hosting the FIM 2010 Synchronization Service must have the following prerequisite software installed:
Windows Server 2008 or Windows Server 2008 R2 64-bit Standard or Enterprise Editions.
Important
When you install Windows Server 2008, do not install Windows Server 2008 Terminal Services. If you install Terminal Services, the FIM 2010 server components do not install.

Windows Installer 4.5
Note
Windows Installer 4.5 can be downloaded from Microsoft download center.

SQL Server 2008 64-bit Standard or Enterprise Editions, Service Pack 1 or later.
The following SQL features must be installed:
Database Engine Services
Microsoft Visual Studio 2008
Note
Microsoft Visual Studio 2008 is required if you are planning to develop rules extensions for FIM 2010 Synchronization Service on this server.

Windows PowerShell 1.0 or Powershell 2.0
Note
PowerShell 1.0 or newer is required to provision resources for Exchange 2007.
PowerShell 2.0 is required to provision resources for Exchange 2010.
You cannot have both versions of PowerShell installed at the same time.
Windows PowerShell 1.0 Features can be installed from the Features options interface included with Windows Server 2008.
Windows Server 2008 R2 ships with PowerShell 2.0. Windows PowerShell 2.0 can also be downloaded from the Microsoft download center for Windows Server 2008.

Microsoft .NET 3.5 SP1 Framework

You can download Microsoft .NET 3.5 SP1 Framework here http://go.microsoft.com/fwlink/?LinkId=129538.

Exchange 2007 SP1 Management Console
Note
Exchange 2007 SP1 Management Tools is required to fully provision Exchange Server 2007 mailboxes, contacts, and groups that are created by the FIM Synchronization Service. You will receive an extension-dll-exception error if you attempt to synchronize these objects to Active Directory without the Exchange 2007 SP1 Management Console installed.

Exchange 2010 provisioning does not require any additional tools to be installed on the FIM Synchronization Service server.


FIM Service Software Requirements

The server hosting the FIM Service must have the following software installed:
Windows Server 2008 or Windows Server 2008 R2 64-bit Standard or Enterprise Editions.
Important
When you install Windows Server 2008, do not install Windows Server 2008 Terminal Services. If you install Terminal Services, the FIM server components do not install.



Windows Installer 4.5
Note
Windows Installer 4.5 can be downloaded from Microsoft download center.

SQL Server 2008 64-bit Standard or Enterprise Editions, Service Pack 1 or later.
The following SQL features must be installed:
Database Engine Service
Full-Text Search
Note
You can use the same SQL Server 2008 instance that the FIM Synchronization Service is using.

Note
After installing SQL Server, make sure that the SQL Agent is running.

Windows PowerShell 1.0 or PowerShell 2.0
Note
FIM Service will work both with PowerShell 1.0 and PowerShell 2.0.
You cannot have both versions of PowerShell installed at the same time.
Windows PowerShell 1.0 Features can be installed from the Features options interface included with Windows Server 2008. Windows Server 2008 R2 ships with PowerShell 2.0.
Windows PowerShell 2.0 can be downloaded from Microsoft download center for Windows Server 2008.

Microsoft .NET 3.0 Features
Note
Microsoft .NET Framework 3.0 Features can be installed from the Features options interface included with Windows Server 2008.

Microsoft .NET 3.5 SP1 Framework

You can download Microsoft .NET 3.5 SP1 Framework here http://go.microsoft.com/fwlink/?LinkId=129538.
FIM Portal and Password Portal Software Requirements
The server(s) hosting the FIM Portal and Password Portal must have the following software installed:Note
If you decide to install the FIM Portal and Password Portal software on different servers, the software prerequisites for both servers are the same.

Windows Server 2008 or Windows Server 2008 R2 64-bit Standard or Enterprise Editions.
Important
When you install Windows Server 2008, do not install Windows Server 2008 Terminal Services. If you install Terminal Services, the FIM 2010 server components do not install.

Microsoft .NET Framework 3.0 Features
Note
Microsoft .NET Framework 3.0 Features can be installed from the Features options interface included with Windows Server 2008.

Microsoft .NET 3.5 SP1 Framework
Note
You can download Microsoft .NET 3.5 SP1 Framework here http://go.microsoft.com/fwlink/?LinkId=129538.

Windows SharePoint Services 3.0 SP1 or SP2
Note
You can download Windows SharePoint Service 3.0 SP2 here http://go.microsoft.com/fwlink/?LinkID=152405.

Note
Make sure you install Windows SharePoint services before you install other server roles. Refer to the installation guide for SharePoint Services for further information: http://go.microsoft.com/fwlink/?LinkID=123878.

Windows SharePoint Services 3.0 Language Pack
Note
If you have installed Windows SharePoint Services 3.0 in a different language than English, then you must install the Windows SharePoint Services 3.0 Language Pack. You can download SP2 from http://go.microsoft.com/fwlink/?LinkID=178266

FIM Add-ins and Extensions Components Software Requirements

The client computers that host the FIM add-ins and extensions components must meet the following software requirements:
Windows XP Professional SP2 or later, 32bit or Windows Vista Enterprise SP1 or later, 32 or 64bit, or Windows 7, 32 or 64 bit.

Windows Installer 3.1 or later (only needed for Windows XP SP2)
Note
You can download Windows Installer 3.1 here http://go.microsoft.com/fwlink/?LinkID=62933

Microsoft .NET Framework 3.5 SP1
Note
You can download Microsoft .NET 3.5 SP1 Framework here http://go.microsoft.com/fwlink/?LinkId=129538.

Microsoft Office Outlook 2007 SP2
This software is required only if you use the FIM Office add-in.
Microsoft Forms 2.0 .NET Programmability Support

This software is required only if you use FIM 2010 Office Integration.
Note
This software is an add-in feature of Microsoft Office 2007. To install this software, select Microsoft Forms 2.0 .NET Programmability Support option under Office Tools when you run setup for Microsoft Office 2007.

Smart Tag .NET Programmability Support

This software is required only if you use FIM 2010 Office Integration.
Note
This software is an add-in feature of Microsoft Office 2007. To install this software, select Smart Tag .NET Programmability Support option under Office Tools when you run setup for Microsoft Office 2007.

.Net Programmability Support for Microsoft Office Outlook

This software is required only if you use FIM 2010 Office Integration.
Note
This software is an add-in feature of Microsoft Office 2007. To install this software, select the .NET Programmability Support option under Microsoft Office Outlook when you run setup for Microsoft Office 2007.