Free Tools

[patris_70]

FREE: Account Lockout Tools – View lockout status and unlock account



One of the most common tasks Windows admins face is to unlock user accounts that have been locked out automatically because the user has exceeded the bad password count. The common way to perform this task is to navigate to the user account in the Active Directory Users and Computers (ADUC) console. If you have to do this once per week or so, then this method is acceptable. But help desk staff in large organizations might prefer the LockoutStatus tool, which belongs to the [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید].



The Account Lockout and Management Tools were published in 2003, but they still work with Windows 7 and Windows Server 2008 R2. Aside from the LockoutStatus tool, the acctinfo.dll is the other tool in the collection that is still useful. I won’t discuss the other utilities here because I find them less useful. The [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] has a short description of each tool.

LockoutStatus

LockoutStatus allows you to quickly access lockout-relevant status information of a user account and unlock it if necessary. After you launch LockoutStatus, you have to select the target—that is, the user that you want to unlock—by specifying the Active Directory domain and the user name. The tool will then display the user state (whether the account is locked or not), the bad password count, when the last bad password was entered, when the password was last set, the lockout time, and which domain controller locked the account.

Right-clicking the account enables you to unlock the account and also to reset the password, which makes sense because the user most likely has just forgotten the password.

Acctinfo (32-bit) and Acctinfo2 (64-bit)

The Acctinfo.dll adds a new property page to the user account properties in ADUC, which displays further useful account lockout status information. In addition to the information in the LockoutStatus tool, you can view the user’s last logon and logoff time and how often the user has successfully logged on. Also useful is that you can check the Domain Password Policy. If the user claims to only have entered the wrong password once, you can quickly view the maximum bad password count setting (among other related settings) of your domain.



To add the new property page, you have to copy the acctinfo.dll file to %windir%\system32 and then register the DLL at a command prompt: regsvr32 acctinfo.dll. If you also copy lockoutstatus.exe to %windir%\system32, you can access the LockoutStatus tool from the user’s property page.



Unfortunately, the acctinfo.dll only works on 32-bit systems. If you try to register acctinfo.dll on a 64-bit system, you will get the error message: “The module of this “acctinfo.dll” may not be compatible with the version of Windows you are running.” There is an acctinfo2.dll floating around the Internet that supports 64-bit. The installation is a bit more cumbersome than on a 32-bit system, but the ZIP file comes with an easy-to-follow, step-by-step guide. I have tried it on a Windows Server 2008 R2 machine and it worked fine.



Please note that this Acctinfo2 is not officially supported by Microsoft. I wasn’t able to track down the source of this version of Acctinfo, although many sites link to the [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]. [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] didn’t find malware code in it, but of course this is no guarantee.

Please also note that Microsoft warns of using Acctinfo on servers that host network applications or services. It is safer to use it on your desktop with [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]

[patris_70]

[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]




Make Your Clients Feel Secure

Implement Data Leak Prevention in 30 Minutes!!



Safer Customer Records With MyDLP,

you will be able to block any data flow containing credit card numbers, social security numbers or IBAN account numbers.Your customers will be more comfortable when sharing their personal and financial information with you

Protect Private Files

You train MyDLP with your private files once, and MyDLP will protect them forever. Your employee or any other person would not be able to transfer them outside

Comprehensive DLP Solution

MyDLP provides data security for web, mail, printers, removable devices and more. Your sensitive data will not leak out through network connections or endpoint devices. For detailed information, check out [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]

Fast and Reliable After 30 minutes,

you will have an open source solution that prevents transfer of any sensitive data via web pages, e-mails, external storage devices, printouts, screenshots etc


[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]

MyDLP is [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] software that runs with multi-site configurations on network servers and endpoint computers. MyDLP development project has made its [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] available under the terms of the [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید][فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید].
MyDLP is one of the first [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] projects for [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]

[patris_70]

[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]

What is AWStats
AWStats is a free powerful and featureful tool that generates advanced web, streaming, ftp or mail server statistics, graphically. This log analyzer works as a CGI or from command line and shows you all possible information your log contains, in few graphical web pages. It uses a partial information file to be able to process large log files, often and quickly. It can analyze log files from all major server tools like Apache log files (NCSA combined/XLF/ELF log format or common/CLF log format), WebStar, IIS (W3C log format) and a lot of other web, *****, wap, streaming servers, mail servers and some ftp servers.
Take a look at this [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] for an idea on features and differences between most famous statistics tools (AWStats, Analog, Webalizer,...).
AWStats is a free software distributed under the [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]. You can have a look at this [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] to know what you can/can't do.
As AWStats works from the command line but also as a CGI, it can work with all web hosting providers which allow Perl, CGI and log access.


Demo / Screenshots
You can browse AWStats demo (real-time update feature has been disabled) to see a sample of most important information AWStats shows you...
[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]
[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]
[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]
[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]
You can halso ave a look at some video tutorials provided by [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] (some are free). Direct link for AWStats videos are [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید].




Features
A full log analysis enables AWStats to show you the following information:
* Number of visits, and number of unique visitors,
* Visits duration and last visits,
* Authenticated users, and last authenticated visits,
* Days of week and rush hours (pages, hits, KB for each hour and day of week),
* Domains/countries of hosts visitors (pages, hits, KB, 269 domains/countries detected, GeoIp detection),
* Hosts list, last visits and unresolved IP addresses list,
* Most viewed, entry and exit pages,
* Files type,
* Web compression statistics (for mod_gzip or mod_deflate),
* OS used (pages, hits, KB for each OS, 35 OS detected),
* Browsers used (pages, hits, KB for each browser, each version (Web, Wap, Media browsers: 97 browsers, more than 450 if using browsers_phone.pm library file),
* Visits of robots (319 robots detected),
* Worms attacks (5 worm's families),
* Search engines, keyphrases and keywords used to find your site (The 115 most famous search engines are detected like yahoo, google, altavista, etc...),
* HTTP errors (Page Not Found with last referrer, ...),
* Other personalized reports based on url, url parameters, referer field for miscellanous/marketing purpose,
* Number of times your site is "added to favourites bookmarks".
* Screen size (need to add some HTML tags in index page).
* Ratio of Browsers with support of: Java, Flash, RealG2 reader, Quicktime reader, WMA reader, PDF reader (need to add some HTML tags in index page).
* Cluster report for load balanced servers ratio.

AWStats also supports the following features:
* Can analyze a lot of log formats: Apache NCSA combined log files (XLF/ELF) or common (CLF), IIS log files (W3C), WebStar native log files and other web, *****, wap or streaming servers log files (but also ftp or mail log files). See [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] for examples.
* Works from command line and from a browser as a CGI (with dynamic filters capabilities for some charts),
* Update of statistics can be made from a web browser and not only from your scheduler,
* Unlimited log file size, support split log files (load balancing system),
* Support 'not correctly sorted' log files even for entry and exit pages,
* Reverse DNS lookup before or during analysis, support DNS cache files,
* Plugin for country detection from IP location (use [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] database or client domain name),
* Plugin for city detection from IP location (use [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] database),
* Plugins for US/Canadian Region , ISP and/or Organizations reports (require non free third product [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید], [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] and/or [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] database)
* WhoIS links,
* A lot of options/filters and plugins can be used,
* Multi-named web sites supported (virtual servers, great for web-hosting providers),
* Cross Site Scripting Attacks protection,
* Several languages. See [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] for full list.
* No need of rare perl libraries. All basic perl interpreters can make AWStats working,
* Dynamic reports as CGI output.
* Static reports in one or framed HTML/XHTML pages, experimental PDF export,
* Look and colors can match your site design, can use CSS,
* Help and tooltips on HTML reported pages,
* Easy to use (Just one configuration file to edit),
* Analysis database can be stored in XML format for XSLT processing,
* A Webmin module,
* Absolutely free (even for web hosting providers), with sources ([فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]),
* Available on all platforms,
* AWStats has a [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید].

Requirements:
To use AWStats, you need the following requirements:
* Your server must log web access in a log file you can read.
* You must be able to run perl scripts (.pl files) from command line and/or as CGI (Perl 5.007003 or higher required to run AWStats 6.9 or higher).
If not, you can solve this by downloading last Perl version at [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] (Win32) or [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] (Unix/Linux/Other).
See [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] to have examples of supported OS and Web servers

[patris_70]

URLSTRESS – a simple GUI tool with source code to stress your favorite web server


There is a number of stress testing tools available for IIS. WCAT and VSTS/ VSALM are probably the best known tools today:

• [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] (free)
• VSTS (Visual Studio Team System) now called VSALM (Visual Studio [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید](part of [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید])

For an overview of both tools, you may consult these blogs:

• [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]
• [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]

Something to be aware of is that [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] logs can be exported to both tools and integrated in a test scenario:

• [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]
• [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]

When performing simple tests just requiring to stress a particular URL, the above tool may be overkill and you may be more interested to use a simple GUI stress tool like the one used in the video "[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]":


Since I couldn't get hold of the above tool, I decided to write my own URLSTRESS tool. The tool currently looks like this:

I'm also posting the tool's source code in case you would like to use it as a skeleton for your own stress tool.
Happy Web Stressing!
Emmanuel Boersma


[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]

[H.Mehrara]

این ابزار بدرد بچه های که طراحی سات میکنن میخوره ... مثل فلش اما خیلی سبک تر
[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید], EASY to set up, fully CUSTOMIZABLE, TAILORED to provide a UNIQUE look & feel, INSPIRING and FUN-to-USE. Play with CU3ER! Its 3D magic is awesome.

[patris_70]

[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]



There are many alternatives to the Windows netstat command that essentially have the same features with the comfort of a GUI. It is worth having a closer look at [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] because it not only has a nice user interface but also some useful additional features.



Like the Windows netstat command TCPEye shows you the remote IP addresses and the open TCP ports. One difference is to the netstat command is that TCP/IP is the live display.

What I like most is the VirusTotal interface. If you detect suspicious processes on a computer, you can upload the program to VirusTotal through TCPEye’s context menu to learn the opinions that major antivirus tools have about the file.

If VirusTotal gives an alarm, you can disconnect and terminate the process from the TCPEye interface. Other useful features are the alarm that notifies you whenever a new TCP connection is established, as well as a Whois IP interface. The GeoIP tool is also nice. It shows you the location of the IP address on a map. If your computer is connected to parts of the world that are somewhat uncommon in your environment, you might want to have a closer look at what’s going on with the computer. This geo tracking feature is also helpful to hunt down hackers.



Since TCPEye is a relatively new tool, it also supports IPv6. I have tried TCPEye V1.0. At the time of this writing, the homepage of TCPEye was not available, so I linked to the CNET download page

[patris_70]

[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]


Introduction

USB Alert is a useful tool that helps you prevent leaving your USB stick behind. Leaving USB sticks behind will usually result in a loss of personal files of high value. In some cases the sticks contain very important documents. These cases can be prevented when USB Alert is used.

Objective

1. Preventing loss of data
2. Useful as a reinforcement object for the security-chain of your business processes.

In use

There are more than 6000 registered clients in use

A few screenshots of USB Alert.



USB Alert warns the user when loging off, shutting down or locking the PC. It skips cardreaders without a memorycard.



USB Alert shows a list of USB sticks plugged into the PC. The user can browse the USB stick or even eject (safely remove) the USB stick

[H.Mehrara]

Remote Desktop and Server Administration
[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] is a free open source Remote Desktop (RD) management solution for administrating remote computers and servers. It is licensed under the GNU General Public License.
[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]
RD Connection Manager delivers the most comprehensive remote connection solution allowing you to manage your whole environment from one command center.

Simple administration: account management, groups and permissions management
Sensitive data encryption: user account settings are SSL-encrypted
Strong connection security
Single sign on: once logged on, user can establish multiple remote connections instantly
Supported protocols: RDP v.5, RDP v.6, VNC, Citrix ICA
Cross-platform (Linux, Windows)
Unified access account storage
Multilingual support
Extendable
Flexible

[Miraclefd]

!!! Exellent

بله آقای اسحاقی ، واقعا ابزارهای عالی ای زحمت کشیدن گذاشتن آقای پاتریس
از شما بخاطر معرفی سایت به من هم ممنون
فرزاد

[patris_70]

[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]


[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]

Virtual CloneDrive works and behaves just like a physical CD/DVD drive, however it exists only virtually. Image files generated with CloneDVD or CloneCD can be mounted onto a virtual drive from your hard-disk or from a network drive and used in the same manner as inserting them into a normal CD/DVD drive.

Probably the best virtual drive software, Virtual CloneDrive allows you to enjoy the freedom of a virtual drive and is completely free. Features

• Supports all common image formats such as ISO, BIN, CCD
• Supports up to 8 virtual drives at the same time
• Easy to use - just double-click an image file to mount as a drive
• Virtual CloneDrive is freeware, you may use it at no cost.

System Requirements

• An IBM-compatible personal computer with a minimum 500 MHz Pentium-class microprocessor (1 GHz recommended) and 128 MB RAM (256 MB recommended)
• Windows 98, Windows ME, Windows 2000, Windows XP, Windows Vista or Windows 7 (32 or 64 bit)
• If you use Windows 2000 or Windows XP you must be an administrator to install Virtual CloneDrive