# موضوع: Free Tools

1. نوشته اصلی توسط Miraclefd
بله آقای اسحاقی ، واقعا ابزارهای عالی ای زحمت کشیدن گذاشتن آقای پاتریس
از شما بخاطر معرفی سایت به من هم ممنون
فرزاد
ما بیشتر مخلصیم ...اونیگایشیماس

2.

3. [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]

Automatically backup files, directories, even entire drives! Karen's Replicator copies selected files from one drive/folder to another. Source and Destination folders can reside anywhere on your network.

Options include repeated copies at intervals as short as a few minutes, or as long as several months, copy only files that have changed, and the replication of folder and file deletions.

New features allow you to specify which files should not be copied, and also which days a job should be skipped

4. [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]

Related Utilities

Description

FastResolver is a small utility that resolves multiple host names into IP addresses and vice versa. You can simply type the list of IP addresses or host name that you want to resolve, or alternatively, you can specify IP addresses range that you want to scan. For local network, FastResolver also allows you to get the MAC address of all IP addresses that you scan. FastResolver is a multithreaded application, so it can resolve dozens of addresses within a few seconds.

5. با تشکر از تمامی زحمات شما

6. [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]

Windows Command to Mount a Remote Share as a Local Hard Drive using the FTP protocol

The FTPUSE command maps a remote share (FTP server) as a local drive, so you can use the FTP server of your choice as a local hard drive. FTPUSE is a free application which was developed during production of the network backup suite [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید], but disks mapped using FTPUSE can be accessed by any application (e.g. Windows Explorer, Total Commander, MS-DOS command shell).

The FTPUSE command syntax is similar to NET USE syntax, as follows:

Syntax
[/NOPASSIVE]
[/OWNERACCESSONLY]
[/PORT:portnumber]
[/DEBUG]
[[/DELETE]]

Parameters
devicename
Sets the name of the device to be connected to or disconnected from an FTP share

ftphostname
Sets the name, IP address or IPv6 address of the FTP server you want to connect to

remotepath
Sets the name of a remote folder to be used as the main folder for the mapped drive

Sets the password required to access the FTP server

/USER
Sets the user name to be used to log onto the remote computer

/NOPASSIVE
Establishes an active connection with the FTP server (active mode)

/OWNERACCESSONLY
The mapped drive will be accessible only from the application from which FTPUSE was launched

/PORT
Sets the TCP port number which should be used to connect to the FTP server. TCP port 21 is used by default.

/DEBUG
Debug mode.

/DELETE
Deletes the established connection with the FTP Server.

Example
To map (assign) the F: drive letter to the ftp.microsoft.com root folder, type:

FTPUSE F: ftp.microsoft.com

To assign the disk-drive device name F: to the developr folder on the ftp.microsoft.com server as if the connection were made from the anonymous user account , type:

FTPUSE F: ftp.microsoft.com/developr ftpuse@example /USER:anonymous

To delete the mapped disk drive, type:

FTPUSE F: /DELETE

Requirements
FTPUSE needs drivers, and so it is distributed as an installation package. The installer includes DOKAN file system drivers and the FTPUSE application. FTPUSE runs under: Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7 (32-bit) and Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008R2 (64-bit).

Other information
FTPUSE uses the [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] file system driver created by Hiroki Asakawa. It is similar in operation to the [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] command present in Linux, which uses the [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] driver. FTP USE can complement the [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] command, which can be used to map network resources but does not support FTP.

Keywords
map ftp as web folder directory share drive disk letter mapping connect mount network redirector

7. Verifying The SSL Certificate Expiration with a tool

An active member of our community developed a very handy tool to verify - or let's actually say monitor - the validity of SSL server certificates.

After [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] and extracting the the ZIP-file the tool is quite self explanatory. Press CTRL+A or click Add Server Entry on the Server List menu. Once you have entered the web address and SSL port, the entry appears in the list of servers.

[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]
To perform the verification, just click the Scan button on the toolbar. The validity information is added to the table.

If you'd need to regularly verify the time validity of SSL certificates, save the server list for re-use

8. The NTToolkit is a set of small and useful utilities designed to help network administrators with their daily administrative tasks. The NTToolkit is freeware and constantly enhanced.

While the majority of tools are available for Windows, Linux/FreeBSD/OSX support for some utilties was added with the release of version 2.0.

IPMon+, IPMon & CheckDB are now available for Linux, FreeBSD & OS X.
IPMon+ is the GUI-version of IPMon (see below). Enhancements include the ability to see the amount of data transmitted between two endpoints, basic filtering and sorting capabilities as well as the ability to copy output to the clipboard.
IPMon is a command-line utility that utilizes the [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] network driver to monitor IP traffic to the local host for troubleshooting and monitoring purposes. Unlike full blown network sniffers, IPMon only shows the IP addresses and ports (for TCP/UDP) affected, and groups output so that repetitive traffic is not being displayed. For example, any IP address that communicates with the local host where IPMon runs is only displayed once.
ADSList analyzes one or more directories and lists any alternate data streams (aka as "hidden streams") that are associated with a file. When an alternate data stream is found, the name of the stream is displayed along with the regular file the stream is associated with.
NTPClient returns the current time as reported by a NTP server and calculates the local clock offset based on RFC 1315 and RFC 2030. NTPClient supports the NTP (Network Time Protocol) up to version 3.
IsAdmin detects whether a user is a member of the local Administrators group, either through direct membership in the Administrators group or through indirect membership through another group.
CheckDB verifies a database connection through ODBC to ensure that a connection to a database can be established. You can optionally also run a single SQL statement after a successful connection has been established. A connection can be specified either through a DSN (Data Source Name) or a connection string. The output from CheckDB can either be displayed in the command line or logged to the event log.
CheckURL verifies availability of a web page and can also check for content inside the page and/or verify the checksum of that page. CheckURL can also log its actions to the event log and supports web-based authentication for password-protected web pages.
The Event Message Browser lets you view all available event messages that may be logged on your system. You can simply select an event log (e.g. Application) and select one of the available event sources from that log (e.g. ntbackup) and then review all the available Event IDs from that source. You can also use the Event Message Browser to generate test messages in the event log.
Password Assistant is a GUI application that lets you update passwords of user accounts on multiple Windows NT, Windows 2000 or Windows XP machines. A good example is updating the Administrator password on all of your workstations.
You can obtain computer names to update from the network neighborhood (with a filter option) or from a text file. The update process can also be logged to a text file.
NetSend is an application with a graphical user interface that allows you to send a text message to a remote Windows NT, Windows 2000 or Windows XP computer that is running the Messenger service (activated by default).
Hardlink Shell Extension is an extension to the Windows shell. It allows you to create hardlinks from within the explorer shell by right-clicking any file. A hard links is a file which is linked to another file, but has a different name.
ServiceSecure allows you to easily reset service passwords by specifying the username and password rather than having to manually configure services through the MMC. Changing the password of a user account used by services is no longer a nightmare, simply use ServiceSecure in a batch file and update all affected services in your entire network in a matter of moments.
Logoff Delay lets you log off a user in a specified amount of time. This can be useful if you want to restrict the logon time of users.
GetHTTP is a command line application that allows you to retrieve files through the HTTP protocol. Please note that SSL is not supported.
File Replace is a command line utility that parses a directory (including subdirectories) and replaces multiple occurrances of one template file.
Super Delete is a command line utility that parses a directory (including subdirectories) and delete multiple occurrances of one file.
CheckTCP is an command line application that can determine whether a TCP port on a host is open. Additionally you can receive initial data sent from the remote host through an open TCP connection, such as when connecting to most SMTP hosts.

CheckTCP can be used to quickly determine whether a certain TCP port is open and optionally display any data sent by the remote host over the established connection. CheckTCP is not intended to be used as a portscanner and does not have good performance for such use.
FPing (Fast Ping) is a command line substitution to the traditional ping.exe utility which ships with Windows. While FPing only supports the most commonly used command-line parameters (less than ping.exe) it does perform the network checks significantly faster than the traditional ping utility.
Sleep is a command line application to pause input for a specified amount of time. This is mainly useful for batch files.
PageSNPP is a command line application that sends text messages to pagers through the SNPP protocol.
Uptime is a command line application that will show you the current uptime of your server or workstation.
SHAChecksum is a command line application that will show you the SHA-256 checksum of file.
Dirsize is a command line application that will show you the size of a directory and its subdirectories, including file statistics.
WakeOnLAN is a command line application that will send a "magic" packet to wake up computers with network cards that support the WakeOnLAN feature.
Dirmon (DirectoryMonitor) is a command line application that monitors a directory (optionally with sub directories) for file changes in real-time

Date, Size & Version: Wed, 14 Apr 2010 12.6 MB v2.0
[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید][فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید][فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید][فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]
[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]

[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]

9. [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]

Free Edition

The free edition is provided in the hope that it is useful to fellow IT Pros, it is not intended to just be a trial/demo of the standard edition (though you can use it as such if you are considering purchasing the standard edition). Whilst some features are only available in the standard edition, hopefully the fact that it still has over 140 predefined queries and can export results to CSV will mean it is the most useful free active directory reporting tool around. See below for a summary of the features that can be found in the free edition (and the standard edition)

Powerful - Query Computers, Contacts, Containers/OUs, Groups, GPOs, Printers, and Users. [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] for a full list of query-able attributes
Fast and Smart - Retrieving only the attributes you are interested in and using intelligent caching helps make this one of fastest AD reporting tools available
Useful - Easily query several attributes that are not included in many other similar tools, such as direct and nested group membership
Accurate - AD Info will query each DC in the domain to get accurate values for any non-replicated attributes (Last Logon etc)
User Friendly - Designed to be easy to use and modern, you can be running your first query within seconds of launching AD Info for the first time
Flexible - Enter your own values. For example instead of a query such as "Members of Domain Admins", AD Info lets you specify any group (see screenshots)
Secure - AD Info does not require Domain Admin permissions so you do not need to log on as an Administrator account to use it
Exportable - Export any query results to CSV file for use in other processes and reports
Multi-Domain Friendly - Easily query any domain you have access to. Enter a domain name and credentials, then any queries you run will target this domain

10. [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]

ForceBindIP is a freeware Windows application that will inject itself into another application and alter how certain Windows Sockets calls are made, allowing you to force the other application to use a specific network interface / IP address. This is useful if you are in an environment with multiple interfaces and your application has no such option for binding to a specific interface.
ForceBindIP works in two stages - the loader, ForceBindIP.exe will load the target application in a suspended state. It will then inject a DLL (BindIP.dll) which loads WS2_32.DLL into memory and intercepts the bind(), connect(), sendto(), WSAConnect() and WSASendTo() functions, redirecting them to code in the DLL which verifies which interface they will be bound to and if not the one specified, (re)binds the socket. Once the function intercepts are complete, the target application is resumed. Note that some applications with anti-debugger / injection techniques may not work correctly when an injected DLL is present; for the vast majority of applications though this technique should work fine.
As of version 1.2, all known functions in WS2_32.DLL that either explicitly or implicitly bind to an interface are intercepted. Please note however that certain programs may still end up using the default interface if they implement connections that do not use the standard winsock functions.
Some programs that have been tested to work with ForceBindIP include DC++, uTorrent, Quake II, Quake III, Diablo II, StarCraft, Internet Explorer, Mozilla Firefox, Google Earth, Infantry, Real Player, Unreal Tournament 2004 (requires -i), Outlook 2000 (requires -i). Programs that do not work include GetRight (anti-debugger / forking techniques), WinCVS (forks cvs.exe)
Usage

ForceBindIP has no graphical interface. You must configure it like a command-line application. To run 'app.exe' and force it to bind to 1.2.3.4, you would run ForceBindIP as follows:
ForceBindIP 1.2.3.4 c:\full\path\to\app.exe
Note that the full path is required; if the path contains spaces, it must be quoted. ForceBindIP can also take the GUID of an interface if for example the IP address is dynamic. To find out the GUID of your interface, run regedit and browse to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Tcpip\Parameters\Interfaces. Find the interface which has the dynamic address and then copy the key name. You can then run ForceBindIP as follows:
ForceBindIP {4FA65F75-7A5F-4BCA-A3A2-59824B2F5CA0} c:\path\to\app.exe
Command line options for the target program may also appear after the path to the executable if needed. Version 1.2 also provides an optional -i parameter. If you find your chosen application crashes on startup or exhibits other unexpected behaviour, try using -i, eg:
For Example:

کد:
ForceBindIP -i 192.168.0.1 "C:\Program Files\Yahoo!\Messenger\YahooMessenger.exe"
ForceBindIP -i 192.168.0.2 "C:\Program Files\Internet Explorer\iexplore.exe" 

This will cause the ForceBindIP loader to wait until the application has entered its message loop before injecting the interception DLL. Note however that any calls that the application makes to Winsock prior to the DLL being loaded will not have been bound to the chosen interface. Download

Due to the APIs required, ForceBindIP will only run on Windows NT/2000/XP/2003. It will not function on Win9x/WinME.
[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] (80 KiB). Graphical setup utility with uninstaller. Installs to system32 directory.
[فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] (8 KiB). Manual installation, this is just a zip of the required files. Note that BindIP.dll MUST reside in windows\system32 for the program to function

11. هرکس به من کلمه ای بیاموزد مرا بنده و مطیع خود کرده است. حضرت علی (ع)

صفحه 9 از 11 نخست 1234567891011 آخرین

#### اطلاعات موضوع

##### کاربرانی که در حال مشاهده این موضوع هستند

در حال حاضر 1 کاربر در حال مشاهده این موضوع است. (0 کاربران و 1 مهمان ها)

#### مجوز های ارسال و ویرایش

• شما نمیتوانید موضوع جدیدی ارسال کنید
• شما امکان ارسال پاسخ را ندارید
• شما نمیتوانید فایل پیوست کنید.
• شما نمیتوانید پست های خود را ویرایش کنید
•