نمایش نتایج: از شماره 1 تا 1 , از مجموع 1

موضوع: کانفیگ مودم D-Link 2730U

  1. #1
    کاربر فعال alisc آواتار ها
    تاریخ عضویت
    Feb 2011
    محل سکونت
    نوشته ها
    تشکرها / پسندها

    پیش فرض کانفیگ مودم D-Link 2730U

    با سلام
    آموزش تصویری کانفیگ مودم ADSL مدل D-Link 2730U رو دیدم ، گفتم اینجا براتون قرار بدم !

    ( همانطور که دوستان مستحظر هستن ، در این مدل روش کانفیگ کمی سختر تر شده و کمی با بقیه مدل ها که تا کنون دیده ایم فرق میکند . )

    امیدوارم که روزی بدردتون بخوره

    D Link DSL 2730 is a reasonably good ADSL WiFi Modem prized around Rs 2100/-. Apart from WiFi Four Ethernet ports are also available. This Modem can be configured very easily through a user friendly web interface.
    Features and Specifications of D Link DSL-2730 U Wireless N 150 Modem

    [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]

    • Latest ADSL /ADSL 2 standard Speed up to 24mbps Downstream and 1Mbps upstream
    • Wireless N 150 Technology supports 802.11n/g/b standards
    • Advanced Security options like Firewall, User access control, WPA/WPA2 etc.
    • Four Ethernet Ports
    • Factory reset button, WPS button and Wireless On/Off switch.

    Modem Configuration

    Now let us configure the Modem for broadband connection. Here we are basically discussing about the configuration part for BSNL and MTNL connection.
    Connect the Modem to the Ethernet port of your PC/Laptop with the supplied Ethernet cable. Power on the Modem and follow the steps .

    1. Open your web browser and type [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید] in the address bar of browser. Then enter the user name “admin” and password “ admin” in the popup box. Now the first page of Modem Configuration page will be displayed. See the screenshot

    2. Click the Advance setup menu on the left sidebar. Now the following page will be displayed.
    3. In that page click the add button as shown in the screenshot. Now in the next page we have to enter the VPI/VCI values of ISP. Here the VPI value of BSNL and MTNL is “0” and VCI of BSNL is 35 and MTNL is 32.

    • Select the DSL Latency: Path 0
    • Select the DSL Link Type: EoA
    • Select Connection mode: Default
    • Encapsulation Mode: LLC/SNAP –BRIDGING
    • Service category : UBR Without PCR
    • Select the IP QoS Scheduler Algorithm to Strict Priority

    4. After the above settings click the “Apply/Save” Button. Now the following page will be displayed.

    5. Now click the WAN service Submenu under the Advance Setup.
    6. In the above shown Wide Area Network (WAN) Service Setup page click the Add button. Now the following page will be displayed.

    7. Click the Next Button for next page.

    8. Here you can decide which configuration mode of your Internet connection. That is PPPoE mode or Bridge Mode. In PPPoE mode the user id and password supplied by your internet service provider is stored inside the Modem itself. Here internet connection will be made through as soon as you switched ON your Modem. PPPoE mode is essential to share the internet connection with multiple PCs, Laptops, Smart phones etc.
    In Bridge mode Modem will work as a bridge and you have to setup a dialer in your PC. In this modem internet connection sharing is not possible through Modem. To configure the Modem in Bridge mode just select the Wan Service type to “Bridging” and keep rest all settings default, then go to the final steps through clicking the “Next” button.
    9. Now let’s configure the Modem in PPPoE Mode
    Select the “WAN Service Type” – PPP over Ethernet (PPPoE) then keep the rest settings default and click the Next button. See the screenshot of next page.

    This is the important step where you have to enter the broadband userid and password supplied by your ISP (BSNL/MTNL etc).

    • PPP Username – Username supplied by ISP
    • PPP Password – Password supplied by ISP
    • PPPoE Service Name – You can type anything for reference ..Say BSNL
    • Authentication Method – Auto
    • Enable Firewall
    • Now Keep all the other settings Default. You need not to set anything

    Click the Next Button

    In this page Select the option “ Select DNS Server Interface from available WAN Interfaces” and click the Next button

    Click the Apply/Save Button.

    Now you have completed all the configuration steps. Just reboot the Modem by Switch OFF/ON. Open the browser and start browsing .
    WiFi Configuration and Security settings of this Modem will be explainned through another post. Stay tuned.

    منبع :
    [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]
    پنل وایبر فقط 29/000 تومان| ارسال 7 تومان |

  2. # ADS
    Circuit advertisement
    تاریخ عضویت
    محل سکونت
    Advertising world
    نوشته ها

اطلاعات موضوع

کاربرانی که در حال مشاهده این موضوع هستند

در حال حاضر 1 کاربر در حال مشاهده این موضوع است. (0 کاربران و 1 مهمان ها)

علاقه مندی ها (Bookmarks)

علاقه مندی ها (Bookmarks)

مجوز های ارسال و ویرایش

  • شما نمیتوانید موضوع جدیدی ارسال کنید
  • شما امکان ارسال پاسخ را ندارید
  • شما نمیتوانید فایل پیوست کنید.
  • شما نمیتوانید پست های خود را ویرایش کنید