ShirazOnline
نمایش نتایج: از شماره 1 تا 2 , از مجموع 2

موضوع: Send AT Commands 2 Mobile or GSM/GPRS Modem

  1. #1
    کاربر عادی mzbcracker آواتار ها
    تاریخ عضویت
    Aug 2007
    محل سکونت
    بوشهر
    نوشته ها
    329
    تشکرها / پسندها

    پیش فرض Send AT Commands 2 Mobile or GSM/GPRS Modem

    Put a valid SIM card into the mobile phone or GSM/GPRS modem. You can obtain a SIM card by subscribing to the GSM service of a wireless network operator.

    Connect your mobile phone or GSM/GPRS modem to a computer and set up the corresponding wireless modem driver. You should find the wireless modem driver in the CD or disk that was provided by the manufacturer. If the manufacturer does not provide such CD or disk with your mobile phone or GSM/GPRS modem, you can go to the manufacturer's web site and see whether the wireless modem driver can be downloaded there. If the wireless modem driver cannot be found on the web site, you can still use Windows' standard modem driver.

    Run MS HyperTerminal by selecting Start -> Programs -> Accessories -> Communications -> HyperTerminal.

    In the Connection Description dialog box, enter a name and choose an icon you like for the connection. Then click the OK button.



    In the Connect To dialog box, choose the COM port that your mobile phone or GSM/GPRS modem is connecting to in the Connect using combo box. For example, choose COM1 if your mobile phone or GSM/GPRS modem is connecting to the COM1 port. Then click the OK button.

    (Sometimes there will have more than one COM port in the Connect using combo box. To know which COM port is used by your mobile phone or GSM/GPRS modem, follow the procedure below:

    In Windows 98:
    Go to Control Panel -> Modem. Then click the Diagnostics tab. In the list box, you can see which COM port the mobile phone or GSM/GPRS modem is connected to.

    In Windows 2000 and Windows XP:
    Go to Control Panel -> Phone and Modem Options. Then click the Modems tab. In the list box, you can see which COM port the mobile phone or GSM/GPRS modem is connected to.)


    The Properties dialog box comes out. Enter the correct port settings for your mobile phone or GSM/GPRS modem. Then click the OK button.

    (To find the correct port settings that should be used with your mobile phone or GSM/GPRS modem, one way is to consult the manual of your mobile phone or GSM/GPRS modem. Another way is to check the port settings used by the wireless modem driver that you installed earlier.

    To check the port settings used by the wireless modem driver on Windows 98, follow these steps:
    a. Go to Control Panel -> Modem.
    b. Select your mobile phone or GSM/GPRS modem in the list box.
    c. Click the Properties button.
    d. The Properties dialog box appears. The Maximum speeds field on the General tab corresponds to HyperTerminal's Bits per second field. Click the Connection tab and you can find the settings for data bits, parity and stop bits. Click the Advanced button and you can find the setting for flow control.

    To check the port settings used by the wireless modem driver on Windows 2000 and Windows XP, follow these steps:
    a. Go to Control Panel -> Phone and Modem Options -> Modems tab.
    b. Select your mobile phone or GSM/GPRS modem in the list box.
    c. Click the Properties button.
    d. The Properties dialog box appears. Click the Advanced tab and then click the Change Default Preferences button.
    e. The Change Default Preferences dialog box appears. The Port speed field on the General tab corresponds to HyperTerminal's Bits per second field. You can also find the setting for flow control on the General tab. On the Advanced tab, you can find the settings for data bits, parity and stop bits.)


    Type "AT" in the main window. A response "OK" should be returned from the mobile phone or GSM/GPRS modem.
    Type "AT+CPIN?" in the main window. The AT command "AT+CPIN?" is used to query whether the mobile phone or GSM/GPRS modem is waiting for a PIN (personal identification number, i.e. password). If the response is "+CPIN: READY", it means the SIM card does not require a PIN and it is ready for use. If your SIM card requires a PIN, you need to set the PIN with the AT command "AT+CPIN=<PIN>".


    If you get the responses above, your mobile phone or GSM/GPRS modem is working properly. You can start typing your own AT commands to control the mobile phone or GSM/GPRS modem.

    هر سوالی در رابطه با این موضوع داشتید همین جا مطرح کنید تا اونجا که بتونم کمک میکنم.در ضمن منبع این آموزش رو پایین نوشتم.و اگه فارسی نیست عذر میخوام چون وقت ندارم به فارسی برگردونم و متن هم خیلی برای فهم روانه.
    بزودی مقاله ای درباره دستورات AT میدم که میتونه این مقاله رو کامل کنه
    منبع : [فقط اعضا می توانند لینک ها را مشاهده کنند برای ثبت نام اینجا را کلیک کنید]

  2. # ADS
    Circuit advertisement
    تاریخ عضویت
    Always
    محل سکونت
    Advertising world
    نوشته ها
    Many
     

  3. #2
    کاربر عادی mbm124 آواتار ها
    تاریخ عضویت
    Apr 2010
    نوشته ها
    1
    تشکرها / پسندها

    پیش فرض

    سلام آیا شما سورس کدی که بتوان ارسال و دریافت اس ام اس را انجام دهد دارید با تشکر از حضرت عالی

اطلاعات موضوع

کاربرانی که در حال مشاهده این موضوع هستند

در حال حاضر 1 کاربر در حال مشاهده این موضوع است. (0 کاربران و 1 مهمان ها)

علاقه مندی ها (Bookmarks)

علاقه مندی ها (Bookmarks)

مجوز های ارسال و ویرایش

  • شما نمیتوانید موضوع جدیدی ارسال کنید
  • شما امکان ارسال پاسخ را ندارید
  • شما نمیتوانید فایل پیوست کنید.
  • شما نمیتوانید پست های خود را ویرایش کنید
  •